OUINTP ( pnum, ival, rval, ifail )
==================================
Output interface parameter
Receives:
KI_cod_slip *pnum --- parameter code
Returns:
int *ival --- integer value of parameter
double *rval --- real value of parameter
KI_cod_error *ifail --- failure indicator
Description:
Outputs the value of an interface parameter.
'pnum' specifies which parameter is to be returned:
different parameters may be integer or real values and are returned in the
appropriate return argument. At present all parameters returned from this
routine are integers.
The valid values of 'pnum' and the corresponding parameters are:
'pnum' return significance
SLIPCH 'ival' If non-zero, all KI routines will check that their
parameters have acceptable values. If zero, KI routines
may not check their parameters.
SLIPJO 'ival' If non-zero, all KI routines will record their received
and returned values in the journal file.
SLIPBB 'ival' Flag indicating whether the Kernel maintains a bulletin
board. The defined values of 'ival' are:
0 no bulletin board maintained
1 bulletin board is maintained for tags only
2 bulletin board is maintained for tags and
user fields
SLIPRB 'ival' If non-zero the modeller will log all changes to the
model. Only if this is done may rollback marks be set or
used. The specific value of 'ival' is the size of the
rollback file in bytes.
SLIPRF 'ival' If 1 then ROLBFN can be used to roll forward.
If 0 then roll forward will not be allowed but the
amount of data stored in the rollback file will be
reduced.
SLIPBT 'ival' Controls the transmit and receive format, which can be
either text, machine-dependent binary, neutral binary,
or using application-registered i/o functions. The allowed
values of 'ival' are:
1 text Receive, text Transmit
2 binary Receive, text Transmit
3 text Receive, binary Transmit
4 binary Receive, binary Transmit
5 text Receive, neutral Transmit
6 binary Receive, neutral Transmit
7 applio Receive, text Transmit
8 applio Receive, binary Transmit
9 applio Receive, neutral Transmit
10 applio Receive, applio Transmit
11 text Receive, applio Transmit
12 binary Receive, applio Transmit
SLIPSN 'ival' Shows the use of binary snapshots. The defined values
of 'ival' are:
1 text get snapshot, text save snapshot
2 binary get snapshot, text save snapshot
3 text get snapshot, binary save snapshot
4 binary get snapshot, binary save snapshot
SLIPLC 'ival' If non-zero, the Kernel will perform local checks of
geometry and topology after a local modification is
made to the model by CRFASU, CRSOFA, DELFAS, RMFASO,
SWEENT, SWIENT, TWSUFA, TWEFAC, TAPFAS or BLEFIX.
SLIPDC 'ival' If non-zero, limited checks on the consistency of
geometry attached to a model with ATTGEO and
neighbouring geometry will be made.
SLIPUF 'ival' If non-zero user fields are received with archived parts.
If SLIPUF is zero user-field values of received parts are
set to zero.
SLIPSI 'ival' If non-zero, the Kernel will perform self intersection
checks on geometry during operations which require the
geometry to pass the checks imposed by CHCKEN.
SLIPCO 'ival' Flag indicating whether the Kernel will perform composite
geometry checks on B-curves and B-surfaces when determining
whether the geometry can be modeled as a single topological
entity.
The defined values of `ival are :
0 Perform all composite geometry checks
1 Perform no composite geometry checks
Values outside this range return KI_bad_value.
This flag is set to non-zero in STAMOD.
SLIPTL 'ival' If non-zero, the modeller will check all tags allocated
against an upper bound equal to the absolute value of
'ival'. An operation that would otherwise result in the
allocation of tags exceeding 'ival' will fail, returning
KI_tag_limit_exceeded.
SLIPGS 'ival' If non-zero, generated surfaces can be created during
a call to SWEENT or SWIENT. If SLIPGS is zero, B-surfaces
will be created instead.
SLIPGT 'ival' Flag indicating whether general bodies are to be legally
returned by KI functions - principally boolean operations.
With SLIPGT set to zero, general bodies will not be
returned and the operations will fail with the same ifail
as at previous versions i.e. KI_non_manifold.
With SLIPGT set to one, general bodies will be returned as
valid results.
