MachiningToolPathUseItf Interface DELIMfgToolMotion

Usage: an implementation of this interface is supplied and you must use it as is. You should not reimplement it.

interface DELIMfgToolMotion

Interface to manage tool motion object.
Role: This interface offers services to manage attributes of tool motion object

Method Index


o ApplyToolCompensation(int,double,double,double,double&,double&,double&)
Applies tool correction on a given point.
o GetContactNormal(int,double&,double&,double&)
Retrieves the coordinates of a contact normal of the tool motion.
o GetContactPoint(int,double&,double&,double&)
Retrieves the coordinates of a contact point of the tool motion.
o GetCorrectorNumber(int&)
Retrieves the tool corrector number on the tool motion.
o GetCorrectorNumber(int&,int)
Retrieves the tool corrector number on the tool motion.
o GetFeedrate(CATUnicodeString&,double&,int)
Retrieves "symbolic" feedrate on a tool motion with the ratio to apply on it.
o GetFeedrateConstantValue(CATICkeParm_var&,double&,int)
Retrieves CKE value of feedrate on the tool motion.
o GetGotoPtPointCoordinates(double&,double&,double&)
Retrieves coordinates on the ToolMotion.
o GetNumberOfContactNormals()
Retrieves number of contact normals of the tool motion.
o GetNumberOfContactPoints()
Retrieves total number of contact points of the tool motion.
o GetNumberOfSubTrajects(int&)
Retrieves total number of subtrajects for a tool motion.
o GetNumberOfTangentVectors()
Retrieves total number of tangent vectors of the tool motion.
o GetNumberOfTipPoints()
Retrieves total number of tip points of the tool motion.
o GetNumberOfToolAxisPoints()
Retrieves number of tool axis of the tool motion.
o GetReferenceFeedrate(DELIMfgToolPathFeedrate_var&,int)
Retrieves value of "symbolic" feedrate stored on the tool motion.
o GetReferenceSpindle(DELIMfgToolPathSpindle_var&)
Retrieves value of spindle feedrate stored on the tool motion.
o GetReferenceToolAssembly(CATBaseUnknown_var&)
Retrieves tool object stored on the manufacturing operation.
o GetReferenceToolAxis(DELIMfgToolPathToolAxis_var&)
Retrieves value of tool axis stored on the tool motion.
o GetSpindle(double&,int)
Retrieves spindle feedrate stored on the tool motion in the case where it is equal to the spindle feedrate stored on the manufacturing operation.
o GetSpindleConstantValue(CATICkeParm_var&,double&,int)
Retrieves CKE value of spindle feedrate on the tool motion.
o GetStartAndEndNumber(int,int&,int&)
Retrieves start and end number in the list of coordinates (tip points, contact points, contact normals, tool axis).
o GetTangentVector(int,double&,double&,double&)
Retrieves the coordinates of a tangent vector of the tool motion.
o GetTangentVectors(int,int,CATListOfDouble&,CATListOfDouble&,CATListOfDouble&)
Retrieves the coordinates for a range of tangent vectors of the tool motion.
o GetTipPoint(int,double&,double&,double&)
Retrieves the coordinates of a tip point of the tool motion.
o GetToolAssembly(CATBaseUnknown_var&)
Retrieves tool object stored on the manufacturing operation.
o GetToolAxisConstantValue(CATMathVector&,int)
Retrieves value of tool axis on the tool motion.
o GetToolAxisPoint(int,double&,double&,double&)
Retrieves the coordinates of a tool axis of the tool motion.
o GetTrajectType(CATUnicodeString&,int)
Retrieves type of traject of the tool motion.
o SetGotoPtPointCoordinates(double,double,double)
Defines coordinates on the ToolMotion.
o SetReferenceFeedrate(CATUnicodeString&,double,int)
Sets "symbolic" feedrate on a tool motion with a ratio to apply on it.
o SetReferenceSpindle(double,int)
Declares that the spindle feedrate on the tool motion is equal to the spindle feedrate stored on the manufacturing operation.
o SetReferenceToolAxis(int)
Declares that the tool axis on the tool motion is equal to the tool axis stored on the manufacturing operation.
o SetTrajectType(CATUnicodeString&,int)
Sets type of traject of the tool motion.
o UnsetTangentVectors()
Unsets the tangent vectors

Methods


o ApplyToolCompensation
public virtual ApplyToolCompensation( const numbloc,
const x1,
const y1,
const z1,
x2,
y2,
z2)
Applies tool correction on a given point. If possible, do not use this method.
Parameters:
x1,y1,z1
The coordinates of the point where to apply tool correction
x2,y2,z2
The coordinates of the point after tool correction
o GetContactNormal
public virtual GetContactNormal( iNumber,
oX,
oY,
oZ)
Retrieves the coordinates of a contact normal of the tool motion.
Parameters:
iNumber
The range of the contact normal
oX,oY,oZ
The coordinates of the contact normal
o GetContactPoint
public virtual GetContactPoint( iNumber,
oX,
oY,
oZ)
Retrieves the coordinates of a contact point of the tool motion.
Parameters:
iNumber
The range of the contact point
oX,oY,oZ
The coordinates of the contact point
o GetCorrectorNumber
public virtual GetCorrectorNumber( oCorrectorNumber)
Retrieves the tool corrector number on the tool motion. If possible, you should use GetCorrectorNumber (int& oCorrectorNumber,const int iSubTraject)
Parameters:
oCorrectorNumber
The value of tool corrector number
Legal values:
  • 0: no tool corrector defined
  • other value: tool corrector number
o GetCorrectorNumber
public virtual GetCorrectorNumber( oCorrectorNumber,
const iSubTraject)
Retrieves the tool corrector number on the tool motion.
Parameters:
oCorrectorNumber
The value of tool corrector number
Legal values:
  • 0: no tool corrector defined
  • other value: tool corrector number
iSubTraject
The number of subtraject
Legal values:
  • =1 : for a
object
  • >=1 : for a object
    • o GetFeedrate
    public virtual GetFeedrate( oString,
    oRatio,
    const iSubTraject)
    Retrieves "symbolic" feedrate on a tool motion with the ratio to apply on it.
    Parameters:
    oString
    The feedrate symbol : use constants defined in CATMfgToolPathDefs.h
    oRatio
    The ratio to apply on the feedrate
    iSubTraject
    The number of subtraject
    Legal values:
    • =1 : for a
    object
  • >=1 : for a object
    • Returns:
    Return code.
    Legal values:
    • TRUE: feedrate stored on the tool motion is "symbolic"
    • FALSE: feedrate stored on the tool motion is not "symbolic"
    o GetFeedrateConstantValue
    public virtual GetFeedrateConstantValue( oFeedrate,
    oRatio,
    const iSubTraject)
    Retrieves CKE value of feedrate on the tool motion.
    Parameters:
    oFeedrate
    The value of feedrate modelized by a CATICkeParm
    oRatio
    The ratio to apply on the feedrate value
    iSubTraject
    The number of subtraject
    Legal values:
    • =1 : for a
    object
  • >=1 : for a object
    • o GetGotoPtPointCoordinates
    public virtual GetGotoPtPointCoordinates( oX,
    oY,
    oZ)
    Retrieves coordinates on the ToolMotion.
    If the type of the ToolMotion is not MfgSeqMotionPoint, nothing is done.
    These coordinates are expressed in the current axis system.
    Coordinates units are millimeters.
    Example:
    The following example gets coordinates on a Manufacturing Point To Point Toolmotion submotion1 
     dim XCoord as double
 dim YCoord as double
 dim ZCoord as double
 Call SubMotion1.GetGotoPtPointCoordinates(XCoord, YCoord, ZCoord)
    o GetNumberOfContactNormals
    public virtual GetNumberOfContactNormals()
    Retrieves number of contact normals of the tool motion.
    Returns:
    The total number of contact normals
    o GetNumberOfContactPoints
    public virtual GetNumberOfContactPoints()
    Retrieves total number of contact points of the tool motion.
    Returns:
    The total number of contact points
    o GetNumberOfSubTrajects
    public virtual GetNumberOfSubTrajects( oNumber)
    Retrieves total number of subtrajects for a tool motion.
    Parameters:
    oNumber
    The total number of subtrajects
    Legal values:
    • =1 : for a
    object
  • >=0 : for a object
    • o GetNumberOfTangentVectors
    public virtual GetNumberOfTangentVectors()
    Retrieves total number of tangent vectors of the tool motion.
    Returns:
    The total number of tangent vectors
    o GetNumberOfTipPoints
    public virtual GetNumberOfTipPoints()
    Retrieves total number of tip points of the tool motion.
    Returns:
    The total number of tip points
    o GetNumberOfToolAxisPoints
    public virtual GetNumberOfToolAxisPoints()
    Retrieves number of tool axis of the tool motion.
    Returns:
    The total number of tool axis
    o GetReferenceFeedrate
    public virtual GetReferenceFeedrate( oFeedrate,
    const iSubTraject)
    Retrieves value of "symbolic" feedrate stored on the tool motion.
    Parameters:
    oFeedrate
    The feedrate value
    iSubTraject
    The number of subtraject
    Legal values:
    • =1 : for a
    object
  • >=1 : for a object
    • Returns:
    Return code.
    Legal values:
    • TRUE: feedrate stored on the tool motion is "symbolic"
    • FALSE: feedrate stored on the tool motion is not "symbolic"
    o GetReferenceSpindle
    public virtual GetReferenceSpindle( oSpindle)
    Retrieves value of spindle feedrate stored on the tool motion.
    Parameters:
    oFeedrate
    The feedrate value
    Returns:
    Return code.
    Legal values:
    • TRUE: spindle feedrate stored on the tool motion is equal to the spindle feedrate stored on the manufacturing operation
    • FALSE: spindle feedrate stored on the tool motion is equal to the spindle feedrate stored on the manufacturing operation
    o GetReferenceToolAssembly
    public virtual GetReferenceToolAssembly( oToolAssembly)
    Retrieves tool object stored on the manufacturing operation.
    Parameters:
    oToolAssembly
    The tool object
    o GetReferenceToolAxis
    public virtual GetReferenceToolAxis( oToolAxis)
    Retrieves value of tool axis stored on the tool motion.
    Parameters:
    oToolAxis
    The tool axis value
    Returns:
    Return code.
    Legal values:
    • TRUE: the tool axis on the tool motion is equal to the tool axis stored on the manufacturing operation
    • FALSE: the tool axis on the tool motion is not equal to the tool axis stored on the manufacturing operation
    o GetSpindle
    public virtual GetSpindle( oRatio,
    const iSubTraject)
    Retrieves spindle feedrate stored on the tool motion in the case where it is equal to the spindle feedrate stored on the manufacturing operation.
    Parameters:
    oRatio
    The ratio on the spindle feedrate
    iSubTraject
    The number of subtraject
    Legal values:
    • =1 : for a
    object
  • >=1 : for a object
    • Returns:
    Return code.
    Legal values:
    • TRUE: the spindle feedrate on the tool motion is equal to the spindle feedrate stored on the manufacturing operation
    • FALSE: the spindle feedrate on the tool motion is not equal to the spindle feedrate axis on the manufacturing operation
    o GetSpindleConstantValue
    public virtual GetSpindleConstantValue( oSpindle,
    oRatio,
    const iSubTraject)
    Retrieves CKE value of spindle feedrate on the tool motion.
    Parameters:
    oSpindle
    The value of spindle feedrate modelized by a CATICkeParm
    oRatio
    The ratio to apply on the spindle feedrate value
    iSubTraject
    The number of subtraject
    Legal values:
    • =1 : for a
    object
  • >=1 : for a object
    • o GetStartAndEndNumber
    public virtual GetStartAndEndNumber( const iSubTraject,
    oStartNumber,
    oEndNumber)
    Retrieves start and end number in the list of coordinates (tip points, contact points, contact normals, tool axis).
    Parameters:
    iSubTraject
    The number of subtraject
    Legal values:
    • =1 : for a
    object
  • >=1 : for a object
    • oStartNumber
    The start number in the list of coordinates
    oEndNumber
    The end number in the list of coordinates
    o GetTangentVector
    public virtual GetTangentVector( const iNumber,
    oX,
    oY,
    oZ)
    Retrieves the coordinates of a tangent vector of the tool motion.
    Parameters:
    iNumber
    The index of the tangent vector
    oX,
    oY, oZ The coordinates of the tangent vector
    o GetTangentVectors
    public virtual GetTangentVectors( const iFirstPoint,
    const iLastPoint,
    oListX,
    oListY,
    oListZ)
    Retrieves the coordinates for a range of tangent vectors of the tool motion.
    Parameters:
    iFirstPoint
    The starting index of the tangent vectors
    iLastPoint
    The ending index of the tangent vectors
    oListX,
    oListY, oListZ The lists of coordinates of the tangent vectors
    o GetTipPoint
    public virtual GetTipPoint( iNumber,
    oX,
    oY,
    oZ)
    Retrieves the coordinates of a tip point of the tool motion.
    Parameters:
    iNumber
    The range of the tip point
    oX,oY,oZ
    The coordinates of the tip point
    o GetToolAssembly
    public virtual GetToolAssembly( oToolAssembly)
    Retrieves tool object stored on the manufacturing operation.
    Parameters:
    oToolAssembly
    The tool object (supports
    interface)
    o GetToolAxisConstantValue
    public virtual GetToolAxisConstantValue( oFeedrate,
    const iSubTraject)
    Retrieves value of tool axis on the tool motion.
    Parameters:
    oToolAxis
    The value of tool axis
    iSubTraject
    The number of subtraject
    Legal values:
    • =1 : for a
    object
  • >=1 : for a object
    • o GetToolAxisPoint
    public virtual GetToolAxisPoint( iNumber,
    oX,
    oY,
    oZ)
    Retrieves the coordinates of a tool axis of the tool motion.
    Parameters:
    iNumber
    The range of the tool axis
    oX,oY,oZ
    The coordinates of the tool axis
    o GetTrajectType
    public virtual GetTrajectType( oType,
    const iSubTraject)
    Retrieves type of traject of the tool motion.
    Parameters:
    oType
    The type of traject : use constants defined in CATMfgToolPathDefs.h
    iSubTraject
    The number of subtraject
    Legal values:
    • =1 : for a
    object
  • >=1 : for a object
    • o SetGotoPtPointCoordinates
    public virtual SetGotoPtPointCoordinates( iX,
    iY,
    iZ)
    Defines coordinates on the ToolMotion.
    If the type of the ToolMotion is not MfgSeqMotionPoint, nothing is done.
    These coordinates are expressed in the current axis system.
    Coordinates units are millimeters.
    Example:
    The following example sets coordinates on a Manufacturing Point To Point Toolmotion submotion1 
     dim XCoord as double
 dim YCoord as double
 dim ZCoord as double
 XCoord = 10.0
 YCoord = 20.0
 ZCoord = 5.0
 Call SubMotion1.SetGotoPtPointCoordinates(XCoord, YCoord, ZCoord)
    o SetReferenceFeedrate
    public virtual SetReferenceFeedrate( const iString,
    const iRatio,
    const iSubTraject)
    Sets "symbolic" feedrate on a tool motion with a ratio to apply on it.
    Feedrate is "symbolic" like "MachiningFeedrate".
    Parameters:
    iString
    The feedrate symbol : use constants defined in DELMfgToolPathDefs.h
    iRatio
    The ratio to apply on the feedrate
    iSubTraject
    The number of subtraject
    Legal values:
    • =1 : for a
    object
  • >=1 : for a object
    • o SetReferenceSpindle
    public virtual SetReferenceSpindle( const iRatio,
    const iSubTraject)
    Declares that the spindle feedrate on the tool motion is equal to the spindle feedrate stored on the manufacturing operation.
    Parameters:
    iRatio
    The ratio to apply on the spindle feedrate stored on the manufacturing operation
    iSubTraject
    The number of subtraject
    Legal values:
    • =1 : for a
    object
  • >=1 : for a object
    • o SetReferenceToolAxis
    public virtual SetReferenceToolAxis( const iSubTraject)
    Declares that the tool axis on the tool motion is equal to the tool axis stored on the manufacturing operation.
    Parameters:
    iSubTraject
    The number of subtraject
    Legal values:
    • =1 : for a
    object
  • >=1 : for a object
    • o SetTrajectType
    public virtual SetTrajectType( const iType,
    const iSubTraject)
    Sets type of traject of the tool motion.
    Parameters:
    iType
    The type of traject : use constants defined in CATMfgToolPathDefs.h
    iSubTraject
    The number of subtraject
    Legal values:
    • =1 : for a
    object
  • >=1 : for a object
    • o UnsetTangentVectors
    public virtual UnsetTangentVectors()
    Unsets the tangent vectors
    This object is included in the file: DELIMfgToolMotion.h
    If needed, your Imakefile.mk should include the module: MachiningToolPathUseItf

    Copyright © 1999-2014, Dassault Systèmes. All rights reserved.